GPN7600 is a kind of central office equipment and can achieve various serve such as TDM service to meet the needs of access layer.
◎Diversity
Converged TDM, IP-MPLS / MPLS-TP, WDM, OTN technology
◎Integration
19 inches chassis,
◎Security7U and supports up to 200 light directions.
Support protection of inner board, between board and two-way service.
◎Various modes board
Service boards support a variety of modes, and service port can be configured independently to adapt to the various needs
◎Flexible scheduling Networking
Support ring network, satellite network, and chain network.
◎Multi-service transport capabilities
Support 2-1000M and various size of broadband access which covering V.35, E1, FE and GE.
◎Support 802.3ah, 802.1ag, Y.173 and MPLS-TP.
◎provide Ethernet network management to support cascade. Provide built-in network management DCN channels and in-band DCN channels
◎All boards support hot-swappable disks and can be mixed.
◎Performance Measurement and convenient network management
Support performance testing requirements of RFC2544 to meet the ping and Trace based on PW and LAP. Support hardware loopback, spontaneous packet and BFD for PW. And network management can achieve self-taught.
◎Provide unique "SAVE" energy-saving mode.
|
Technical specifications |
|||
|
Slot number |
23 |
Service module number |
16 |
|
Main control module |
2 |
||
|
Fan module |
3 |
Power supply module |
2 |
|
Console interface |
Physical interface: |
Electric lever: |
Baud rate: |
|
Physical specifications |
|||
|
Dimension(mm) (W*D*H) |
442*257*308 |
||
|
Environment |
Working temperature: 0℃～50℃ Storage temperature: -20℃～＋70℃ Humidity: 95%(non-condensing) |
||
|
Weight |
Rack frame：≤10kg Overall：≤30kg |
||
|
Power consumption |
≤300W |
||
|
Power supply |
AC220V and DC -48V Support backup protection |
||
|
Reliability |
System availability: 0.9999965 The annual average return rate: less than 1.5% System mean time to repair (MTTR): 1 hour System Mean Time Between Failures (MTBF): 33.08 years |
||
|
Packet performance |
|||
|
MPLS processing capability |
Establish ways: static LSP Protection: 1 + 1 or 1: 1 MPLS Tunnel APS OAM: Support for MPLS-TP OAM, compliance with ITU-T G.8113 standard. |
||
|
PWE3 processing capacity |
Service Type: TDM PWE3 (CES) services and ETH PWE3 services Establish ways: static PW Protection: 1 + 1 or 1: 1 PW APS Support PW OAM, compliance with ITU-T G.8113 standard. |
||
|
Protection |
Support LAG and TRUNK |
||
|
Synchronize |
Support G.8261 and G.8262 Port receive/transmit synchronous Ethernet clock: GE / 10GE Supports input / output SSM message Clock frequency stability (tracking mode): Less than 50ppb |
||
|
OAM |
MPLS OAM: include Tunnel OAM and PW OAM |
||
|
|
ETH OAM: ◎IEEE 802.1ag OAM Provide management of OAM maintenance point, CC (Continuity Check), LB (Loopback) and LT (Link Trace). ◎IEEE 802.3ah OAM Provide link performance monitoring, fault detection, remote loopback, loopback testing and loopback port blocking. |
||
|
QoS |
.DiffServ: Support of QoS based on packet information (including CVLAN priority, SVLAN priority and DSCP value) and PHB service. Complex traffic classification: support classification under the CVLAN ID, SVLAN ID, CVLAN priority, SVLAN priority, CVLAN ID + CVLAN priority, SVLAN ID + SVLAN priority, and packets DSCP. Support CAR and specified PORT. Queue scheduling: SP / WRR / SP + WRR |
||
|
TDM performance |
|||
|
Protection |
SNCP: Supports VC-12 / VC-4 level SNCP protection Protection switching time ≤50ms Ring MSP: Support STM-1 / STM-4 / STM-16 level MSP ring Protection switching time ≤50ms Linear MSP: Support STM-1 / STM-4 / STM-16 level linear MSP Protection switching time ≤50ms |
||
|
Synchronic |
Support tracking, maintaining, and oscillations. Standard SSM protocol Support branches retiming. |
||
|
Product information |
Description |
Part number |
Support/Remark |
|
|
GPN7600 setup |
Must be equipped |
Frame |
GPN7600 |
Large capacity |
|
Main control module |
NUM |
1+1 protection is available |
||
|
Power supply module |
PWU-DC |
-48V |
||
|
PWU-AC |
220V |
|||
|
Optional |
Fan module |
FAN |
Replaceable |
|
|
The crosses module |
Optional |
2 * STM-1 optical interface |
2 * STM-1 |
Uplink capacity |
|
4*STM-1 optical interface |
4*STM-1 |
Uplink capacity |
||
|
2*STM-4 optical interface |
2*STM-4 |
Uplink capacity |
||
|
4*STM-4 optical interface |
4*STM-4 |
Uplink capacity |
||
|
Packet switching module |
Optional |
4*GE optical/ electric |
4*GE |
Provide switching, OAM and MPLS-TP. |
|
2*10GE optical/ electric |
2*10GE |
Provide switching, OAM and MPLS-TP. |
||
|
PDH optical tributary |
Optional |
4 |
4*PDH |
GW@ A,E series optical terminal |
|
EoS branches |
Optional |
4 |
4*FX |
GFT1501 fiber Transceiver |
|
8 |
8*FX |
|||
|
8 |
8*FE |
|||
|
Eop branches |
Optional |
4 |
4*FX |
GFT1501 fiber Transceiver |
|
8 |
8*FX |
|||
|
8 |
8*FE |
|||
|
Collective module |
Optional |
Provide 1 GE optical/ electric interface to collect 63 VCG paths |
1*GE Combo |
|
|
STM-1 optical path |
Optional |
4 |
4*STM-1 |
E6080 series remote MSTP |
|
8 |
8*STM-1 |
|||
|
STM-4 optical path |
Optional |
4 |
4*STM-4 |
E6000 series remote MSTP |
|
Packet service module |
Optional |
8 |
8*FX |
GFT1501 series fiber transceiver and GPN6000 series smart terminal. |
|
4 |
4*GE |
GFT1501 series fiber transceiver, GPN6000 series smart terminal, and GPN700 series packet terminal. |
||
GPN7600 is the extension of aggregation network and designed for access network. GPN7600 can match aggregation network whatever the condition it is. It can provide flexible multi-service for customers.
